您现在的位置是：网站首页> 编程资料编程资料

分享Win10 1903过TP的双机调试问题_其它综合_

2023-05-27 370人已围观

简介分享Win10 1903过TP的双机调试问题_其它综合_

差不多我用到的大部分代码都是从上面cv（Ctrl+c---->Ctrl+v）下来的

1、首先解决The context is partially valid. Only x86 user-mode context is available.

具体方式是hookKdpTrap

2、防止安全组件加载失败

SharedUserData->KdDebuggerEnabled = FALSE; //防止安全组件加载失败，SharedUserData这个是一个导出的全局变量直接写就行

3、XP会清零KdDebuggerEnabled

这里本来是打算做一个定时器，但是还是会导致TesNginx.Sycccccccccccccc出现蓝屏，所以只有手动的去修改

4、断链隐藏 kdcom，防止kdcom内存被清空导致和windbg通讯不了

5、XP会检测KdEnteredDebugger，如果是1就直接蓝屏

处理方式是让他去找其他位置(PUCHAR)KdEnteredDebugger + 0x30; //据暗中观察，+0x30 的位置恒为0

做完这些之后基本上就能够下断点了，但是其实还是有问题（由于hook了系统函数有一定的几率会触发109错误->PathGuard，一开始我也分不清楚，后来慢慢的也了解了）

之后放上一张过了图片

最后把代码也带上吧，.asm文件很简单简单的inlinhook就行了

#include 
#include 
extern void debg();
//关闭写保护
KIRQL WPOFFx64(){
 KIRQL irql = KeRaiseIrqlToDpcLevel();
 UINT64 cr0 = __readcr0();
 cr0 &= 0xfffffffffffeffff;
 __writecr0(cr0);
 _disable();
 return irql;
}
//开启写保护
void WPONx64(KIRQL irql){
 UINT64 cr0 = __readcr0();
 cr0 |= 0x10000;
 _enable();
 __writecr0(cr0);
 KeLowerIrql(irql);
}
//这里尝试过tp的双机调试，环境为win10 1903
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//1、首先解决The context is partially valid. Only x86 user-mode context is available. 
/*
nt!KdpTrap:
fffff807`64bfffc8 48895c2408   mov   qword ptr [rsp+8],rbx
fffff807`64bfffcd 4889542410   mov   qword ptr [rsp+10h],rdx
fffff807`64bfffd2 57       push  rdi
fffff807`64bfffd3 4883ec40    sub   rsp,40h
fffff807`64bfffd7 33d2      xor   edx,edx
*/
ULONG64 orgkdt = 0xfffff80166201fc8;
//ULONG64 orgkdt= 0xfffff80764bfffc8;//直接写硬编码,这里需要进行修改<-------------------------------------------------------------------------------------------------------------------------------------------------------
NTKERNELAPI UCHAR * PsGetProcessImageFileName(__in PEPROCESS Process);
extern NTSTATUS hdbktrap(IN PKTRAP_FRAME TrapFrame,IN PKEXCEPTION_FRAME ExceptionFrame,IN PEXCEPTION_RECORD ExceptionRecord,IN PCONTEXT ContextRecord,IN KPROCESSOR_MODE PreviousMode,IN BOOLEAN SecondChanceException);
//这里做一个跳转
VOID ModifyKdpTrap(PVOID myaddress,PVOID targetaddress) {
 KIRQL irql;
 ULONGLONG myfun;
 UCHAR jmp_code[] = "\x48\xB8\xFF\xFF\xFF\xFF\xFF\xFF\xFF\x00\xFF\xE0\x00\x00";//mov rax xxx,jmp rax
 myfun = (ULONGLONG)myaddress;//替换成自己的函数地址
 RtlCopyMemory(jmp_code + 2, &myfun, 8);
 //debg();
 irql = WPOFFx64();
 RtlCopyMemory(targetaddress, jmp_code, 12);
 WPONx64(irql);
}
//这里完成hook
NTSTATUS HookKdpTrap(
 IN PKTRAP_FRAME TrapFrame,
 IN PKEXCEPTION_FRAME ExceptionFrame,
 IN PEXCEPTION_RECORD ExceptionRecord,
 IN PCONTEXT ContextRecord,
 IN KPROCESSOR_MODE PreviousMode,
 IN BOOLEAN SecondChanceException){
 
 PEPROCESS hp = PsGetCurrentProcess();
 if (!_stricmp((char *)PsGetProcessImageFileName(hp), "TASLogin.exe")){
 return STATUS_SUCCESS;
 }
 return hdbktrap(TrapFrame, ExceptionFrame, ExceptionRecord, ContextRecord, PreviousMode, SecondChanceException);
}
//这里做一个还原
void UnHookKdpTrap() {
 KIRQL irql;
 UCHAR orignal_code[] = "\x48\x89\x5c\x24\x08\x48\x89\x54\x24\x10\x57\x48\x83\xec\x40";//mov rax xxx,jmp rax
 irql = WPOFFx64();
 RtlCopyMemory(orgkdt, orignal_code, 15);
 WPONx64(irql);
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//2、 防止安全组件加载失败
VOID DisableKdDebuggerEnabled() {
 SharedUserData->KdDebuggerEnabled = FALSE; //防止安全组件加载失败
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//3、TP会清零KdDebuggerEnabled,这里做一个每隔一秒的定时器
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//4、断链隐藏 kdcom，防止kdcom内存被清空导致和windbg通讯不了
/*
0: kd> dt _eprocess
nt!_EPROCESS
  +0x000 Pcb       : _KPROCESS
  +0x2e0 ProcessLock   : _EX_PUSH_LOCK
  +0x2e8 UniqueProcessId : Ptr64 Void
  +0x2f0 ActiveProcessLinks : _LIST_ENTRY
*/
PDRIVER_OBJECT pDriverObject = NULL;
typedef struct _KLDR_DATA_TABLE_ENTRY {
 LIST_ENTRY InLoadOrderLinks;
 PVOID ExceptionTable;
 ULONG ExceptionTableSize;
 PVOID GpValue;
 ULONG UnKnow;
 PVOID DllBase;
 PVOID EntryPoint;
 ULONG SizeOfImage;
 UNICODE_STRING FullDllName;
 UNICODE_STRING BaseDllName;
 ULONG Flags;
 USHORT LoadCount;
 USHORT __Unused5;
 PVOID SectionPointer;
 ULONG CheckSum;
 PVOID LoadedImports;
 PVOID PatchInformation;
} KLDR_DATA_TABLE_ENTRY, *PKLDR_DATA_TABLE_ENTRY;
VOID HideDriver(){
 PKLDR_DATA_TABLE_ENTRY entry = (PKLDR_DATA_TABLE_ENTRY)pDriverObject->DriverSection;
 PKLDR_DATA_TABLE_ENTRY firstentry;
 UNICODE_STRING uniDriverName;
 firstentry = entry;
 // 初始化要隐藏驱动的驱动名
 RtlInitUnicodeString(&uniDriverName, L"kdcom.dll");
 while ((PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink != firstentry){
 if (entry->FullDllName.Buffer != 0){
  if (RtlCompareUnicodeString(&uniDriverName, &(entry->BaseDllName), FALSE) == 0){
  //DbgPrint("隐藏驱动 %ws 成功!\n", entry->BaseDllName.Buffer);
  // 修改 Flink 和 Blink 指针, 以跳过我们要隐藏的驱动
  *((ULONG*)entry->InLoadOrderLinks.Blink) = (ULONG)entry->InLoadOrderLinks.Flink;
  entry->InLoadOrderLinks.Flink->Blink = entry->InLoadOrderLinks.Blink;
  /*
   使被隐藏驱动LIST_ENTRY结构体的Flink, Blink域指向自己
   因为此节点本来在链表中, 那么它邻接的节点驱动被卸载时,
   系统会把此节点的Flink, Blink域指向它相邻节点的下一个节点.
   但是, 它此时已经脱离链表了, 如果现在它原本相邻的节点驱动被
   卸载了, 那么此节点的Flink, Blink域将有可能指向无用的地址, 而
   造成随机性的BSoD.
  */
  entry->InLoadOrderLinks.Flink = (LIST_ENTRY*)&(entry->InLoadOrderLinks.Flink);
  entry->InLoadOrderLinks.Blink = (LIST_ENTRY*)&(entry->InLoadOrderLinks.Flink);
  break;
  }
 }
 // 链表往前走
 entry = (PKLDR_DATA_TABLE_ENTRY)entry->InLoadOrderLinks.Flink;
 }
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
//5、处理TP蓝屏
/*
fffff807`642d2210 48895c2420   mov   qword ptr [rsp+20h],rbx
fffff807`642d2215 4488442418   mov   byte ptr [rsp+18h],r8b
fffff807`642d221a 56       push  rsi
fffff807`642d221b 57       push  rdi
fffff807`642d221c 4154      push  r12
fffff807`642d221e 4155      push  r13
fffff807`642d2220 4157      push  r15
fffff807`642d2222 4883ec20    sub   rsp,20h
*/
#define KdEnteredDebugger 0xfffff80165d061e0
//#define KdEnteredDebugger 0xfffff80764704100//直接写硬编码,这里需要进行修改<-----------------------------------------------------------------------------------------------------------------------------------------------
extern PMDL hookIoAllocateMdl(__drv_aliasesMem PVOID VirtualAddress, ULONG Length, BOOLEAN SecondaryBuffer, BOOLEAN ChargeQuota, PIRP Irp);
ULONG64 IoAllocateM=0;
//这里做一个跳转
VOID ModifyIoAllocateMdl(PVOID myaddress, PVOID targetaddress) {
 KIRQL irql;
 ULONGLONG myfun;
 UCHAR jmp_code[] = "\x48\xB8\xFF\xFF\xFF\xFF\xFF\xFF\xFF\x00\xFF\xE0\x00\x00";//mov rax xxx,jmp rax
 myfun = (ULONGLONG)myaddress;//替换成自己的函数地址
 RtlCopyMemory(jmp_code + 2, &myfun, 8);
 //debg();
 irql = WPOFFx64();
 RtlCopyMemory(targetaddress, jmp_code, 12);
 WPONx64(irql);
}
PMDL newIoAllocateMdl(__drv_aliasesMem PVOID VirtualAddress, ULONG Length, BOOLEAN SecondaryBuffer, BOOLEAN ChargeQuota, PIRP Irp){
 //debg();
 if(VirtualAddress == KdEnteredDebugger){
 //DbgPrint("[KdEnteredDebugger] address: %p\n", KdEnteredDebugger);
 VirtualAddress = (PUCHAR)KdEnteredDebugger + 0x30; //据暗中观察，+0x30 的位置恒为0
 }
 return hookIoAllocateMdl(VirtualAddress, Length, SecondaryBuffer, ChargeQuota, Irp);
}
//这里做一个还原
void UnHookIoAllocateMdl() {
 KIRQL irql;
 UCHAR orignal_code[] = "\x48\x89\x5c\x24\x20\x44\x88\x44\x24\x18\x56\x57\x41\x54\x41\x55";
 irql = WPOFFx64();
 RtlCopyMemory(IoAllocateMdl, orignal_code, 15);
 WPONx64(irql);
}
//----------------------------------------------------------------------------------------------------------------------------------------------------------------
VOID DriverUnload(PDRIVER_OBJECT DriverObject) {
 //还原之前的KdpTraphook
 UnHookKdpTrap();
 //还原之前的IoAllocateMdl
 UnHookIoAllocateMdl();
 //取消定时器
 
 DbgPrint("See You !\n");
}
NTSTATUS DriverEntry(PDRIVER_OBJECT DriverObject, PUNICODE_STRING RegPath) {
 pDriverObject = DriverObject;
 DriverObject->DriverUnload = DriverUnload;
 //这里把这个函数进行了hook
 ModifyKdpTrap(HookKdpTrap, orgkdt);
 //防止安全组件加载失败
 DisableKdDebuggerEnabled();
 //摘掉kdcom的eprocess
 HideDriver();
 //干掉TP蓝屏
 IoAllocateM = (ULONG64)IoAllocateMdl;//得到函数的地址
 ModifyIoAllocateMdl(newIoAllocateMdl, IoAllocateMdl);
 //设置定时器
 return STATUS_SUCCESS;
}

总结

以上所述是小编给大家分享的Win10 1903过TP的双机调试问题，希望对大家有所帮助，如果大家有任何疑问请给我留言，小编会及时回复大家的。在此也非常感谢大家对网站的支持！
如果你觉得本文对你有帮助，欢迎转载，烦请注明出处，谢谢！

您可能感兴趣的文章:

详解Win10 Bash/WSL调试Linux环境下的.NET Core应用程序

上一篇：Window下安装JDK1.8+Tomcat9.0.27+Mysql5.7.28的教程图解_其它综合_

下一篇：详解window启动webpack打包的三种方法_其它综合_

您现在的位置是：网站首页> 编程资料编程资料

分享Win10 1903过TP的双机调试问题_其它综合_

相关内容

点击排行

本栏推荐

猜你喜欢